Diferència entre revisions de la pàgina «Educational experiences with open source hardware and Snap!»
m |
|||
| Línia 8: | Línia 8: | ||
= Links to Snap! codes = | = Links to Snap! codes = | ||
[http://formacio.things.cat/snap7/snap.html#open:../snapcon/2022/IoT-02_withMac.xml IoT-02 board remote control] | [http://formacio.things.cat/snap7/snap.html#open:../snapcon/2022/IoT-02_withMac.xml IoT-02 board remote control] | ||
| + | |||
| + | [http://rubi.xoic.coop/Snap/snap.html#run:exemples/06_sensorsRubi.xml Reading LoRaWAN sensors from Snap!] | ||
[http://formacio.things.cat/snap7/snap.html#open:../snapcon/2022/elevatorSnapCon.xml Elevator controlled by IoT-02 board] | [http://formacio.things.cat/snap7/snap.html#open:../snapcon/2022/elevatorSnapCon.xml Elevator controlled by IoT-02 board] | ||
Revisió del 10:56, 6 ago 2022
Direct access to this wiki page: https://ja.cat/4Qlcf
Contingut
Slides
Snap!Con 2022 Educational experiences with open source hardware and Snap! Slides
Links to Snap! codes
Reading LoRaWAN sensors from Snap!
Elevator controlled by IoT-02 board
S4A - PLB
Make It! A kit including S4A Programming Learning Board
S4A - PLB can be controlled by Snap4arduino or S4A (Scratch4Arduino)
S4A Programming Learning Board (KiCAD files)
LoRaWAN sensors reading
Ús de les dades generades pels sensors LoRaWAN i arquitectura del sistema. Rubí 2020
Pressing 1 shows CO2_01 and AQ_01 data
Pressing 2 shows CO2_02 and AQ_02 data
Pressing 3 shows CO2_03 and AQ_03 data
Pressing 4 shows CO2_04 and AQ_04 data
Pressing t shows TRS21_01 data
Pressing s stops running
IoT-02
Previous
PLB-IoT-I2C (PLB-IoT-I2C at Github)
Introduction
Data access using Snap!
Conexión entre la placa IoT-02 y Snap! mediante MQTT
VirKO
Previous
SomVentilated Air Quality Meter for Preventing COVID-19 based on IoT-02 board
Data access using Snap!
Codes used in this presentation
Snap! and IoT-02's Arduino IDE codes (zip file)
