Diferència entre revisions de la pàgina «Educational experiences with open source hardware and Snap!»
Salta a la navegació
Salta a la cerca
m |
|||
| Línia 47: | Línia 47: | ||
== Data access using Snap! == | == Data access using Snap! == | ||
[http://formacio.things.cat/snap8/snap.html#open:../snapcon/2022/VirKO_test_02.xml VirKO Test on Snap!] | [http://formacio.things.cat/snap8/snap.html#open:../snapcon/2022/VirKO_test_02.xml VirKO Test on Snap!] | ||
| + | |||
| + | = Codes used in this presentation = | ||
| + | [https://www.binefa.cat/training/snapcon2022/codesSnapCon2022.zip Snap! and IoT-02's Arduino IDE codes] | ||
Revisió del 10:15, 6 ago 2022
Contingut
S4A - PLB
Make It! A kit including S4A Programming Learning Board
S4A - PLB can be controlled by Snap4arduino or S4A (Scratch4Arduino)
S4A Programming Learning Board (KiCAD files)
LoRaWAN sensors reading
Ús de les dades generades pels sensors LoRaWAN i arquitectura del sistema. Rubí 2020
Pressing 1 shows CO2_01 and AQ_01 data
Pressing 2 shows CO2_02 and AQ_02 data
Pressing 3 shows CO2_03 and AQ_03 data
Pressing 4 shows CO2_04 and AQ_04 data
Pressing t shows TRS21_01 data
Pressing s stops running
IoT-02
Previous
PLB-IoT-I2C (PLB-IoT-I2C at Github)
Introduction
Data access using Snap!
Conexión entre la placa IoT-02 y Snap! mediante MQTT
VirKO
Previous
SomVentilated Air Quality Meter for Preventing COVID-19 based on IoT-02 board
